Fiber optic and chose the appropriate equipment for the installation

Once you decided to use the fiber optic and chose the appropriate equipment for the installation, it is time to determine exactly what the location of the cable network and hardware will be. It must be remembered that each installation is unique. The exact location of the cable network will be determined by the physical locations along the entire layout, by local building codes and laws, and by other people involved in the design. As usual, the facilities in internal and external plant are different, so we will study them separately.

The facilities on the internal floor and at the campus level may be simpler since the physical area in question is smaller and there are fewer options. You should start with a good set of architectural plans and, if possible, communicate with the architect, the contractor and/or the building administrator. Contacting them allows you to have the advice and information from other people. Fortunately, the drawings are available in the form of CAD files, so you can obtain a copy to make the design of the wiring network on your computer, and this greatly facilitates the possibility of making adjustments to the design and writing reports about its design.

If the building is still in the design stage, you may have the opportunity to contribute ideas about the requirements of the cable network. Ideally, that means that you can influence the location of the equipment rooms, the routing of the trays and cable ducts, the availability of adequate conditioned energy and the separate ground connections for data centers, and insufficient capacity of the air conditioning and other network needs. In the case of already constructed buildings, the detailed architectural plans give you the possibility of routing the wiring and network equipment between the obstacles that you will inevitably encounter in your path.
Fiber optic jobs salary
There are several ways to perform the installations in the external plant (OSP) according to the cable layout. The route can cross large areas of open countryside, extend along urban or rural paved roads, ravines, rivers or lakes or, more likely, some combination of all these lands. Underground cables, overhead cables or underwater cables may be required. The cables can be in underground conduits, of a corrugated subduct or buried directly, and the aerial cables can support themselves or be linked to a messenger cable. Longer runs, in general, involve crossing water zones, so that the cables can run under water or be linked along a bridge along with other cables.